Note: View for a complete list of publications
Publications
Dorsainvil, J. S., Batayneh, J., McDonald, M., Pachter, N., Patel, S., Manashirov, D., Hookway, T., Koh, A., Advanced Materials Technologies, 2025,
Dorsainvil, J. S., Brown, M. S., Rafiee, Z., Elhadad, A., Choi, S., Koh, A., Advanced Materials Interfaces, 2024, 11, 1, 2300487.
Yang, J. H., David, U., Noh, Y. S., Koh, A., Sensors and Actuators B: Chemical, 2023, 395, 134441.
Sivakumar, J., Yang, J. H., Kelly, M. S., Koh, A., & Won, D., Expert Systems with Applications, 2022, 210, 118471.
Brown, M. S., Browne, K., Kirchner, N., Koh, A., ACS Sens., 2022, 7, 7, 1996–2005
Brown, M. S., Somma, L., Mendoza, M., Noh, Y., Mahler, G. J., Koh, A. Nat. Commun., 2022, 13, 3727
Pearlmutter, P., DeRose, G., Samson, C., Linehan, N., Cen, Y., Begdache, L., Won, D., and Koh, A., Sci. Rep., 2020, 10, 19050
Bishal, A., Anderson, N. D., Hung, S., Jokisaari, J. R., Klie, R. F., Koh, A., Abdussalam, W., Sukotjo, C.*, and Takoudis, C.*, ACS Appl. Mater. Interfaces, 2020
Samson, C., Koh, A., Stress Monitoring and Recent Advancements in Wearable Biosensors, Front. Bioeng. Biotechnol., 2020, 8, 1037
Heo, B., Fiola, M., Yang, J. H., Koh, A., A low-cost, composite collagen-PDMS material for extended fluid retention in the skin-interfaced microfluidic devices, Colloid and Interface Science Communications, 2020, 38, 100301
Brown, M. S., Mendoza, M., Chavoshnejad, P., Razavi, M. J., Mahler, G. J., Koh, A., Electronic‐ECM: A Permeable Microporous Elastomer for an Advanced Bio‐Integrated Continuous Sensing Platform. Adv. Mater. Technol. 2020, 2000242.
Tu, E.; Pearlmutter, P.; Tiangco, M.; Derose, G.; Begdache, L.; Koh, A. "Comparison of Colorimetric Analyses to Determine Cortisol in Human Sweat" ACS Omega, 2020, 5 (14), 8211-8218
Ashley, B. A.; Brown, M. S.; Park, Y.; Kuan, S.; Koh, A. "Skin-inspired, Open Mesh Electrochemical Sensors for Lactate and Oxygen Monitoring" Biosensors and Bioelectronics, 2019, 132, 343-351
Brown, M. S.; Ashley, B.; Koh, A."Wearable Technology for Chronic Wound Monitoring: Current Dressings, Advancements, and Future Prospects" Front. Bioeng. Biotechnol. 2018, 6, 47
Yu, X.; Wang, H.; Ning, X.; Sun, R.; Salomao, M.; Albadawi, H.; Silva, A. C.; Yu, Y.; Tian, L.; Koh, A.; Lee, C. M.; Chempakasseril, A.; Tian, P.; Pharr, M. Yuan, J.; Huang, Y.; Oklu, R.; Rogers, J. A. “Needle-shaped Ultrathin Piezoelectric Microsystems for Guided Tissue Targeting via Mechanical Sensing” Nature Biomedical Engineering, 2018, 2, 165-172 (cover article)
Kim, S. B.; Zhang, Y.; Won, S. M.; Bandodkar, A. J.; Sekine, Y.; Xue, Y.; Harshman, S. W.; Martin, J. A.; Park, J. M.; Ostojic, D.; Ray, T. R.; Crawford, K. E.; Koo, J.; Yoon, J.; Kim, J-H; Kim, J.; Lee, K-T; Choi, J.; Pitsch, R. L.; Grigsby, C. C.; Strang, A. J.; Chen, Y-Y; Koh, A.; Ha, J. S.; Huang, Y.; Xu, S.; Kim, S. W., Rogers, J. A. “Super-Absorbent Polymer Valves and Colorimetric Chemistries for Time-Sequenced Discrete Sampling and Chloride Analysis of Sweat via Skin-Mounted Soft Microfluidics” Small, 2018, 1703334
Lee, Y. K.†; Jang, K.-I.†; Ma, Y.†; Koh, A.†; Chen, H.; Jung, H. N.; Kim, Y.; Kwak, J. W.; Wang, L.; Xue, Y.; Yang, Y.; Tian, W.; Jiang, Y.; Zhang, Y.; Feng, X.; Huang, Y.; Rogers, J. A. "Chemical Sensing Systems that Utilize Soft Electronics on Thin Elastomeric Substrates with Open Cellular Designs", Advanced Functional Materials, 2017, 27, 1605476, † Equally contributed the first author
Koh, A.; Lee, J.; Song, J.; Shin, W. “Simple and Ultrasensitive Chemically Amplified Electrochemical Detection of Ferrocenemethanol on 4-Nitrophenyl Grafted Glassy Carbon Electrode”, Journal of Electrochemical Science and Technology, 2016, 7(4), 286-292
Koh, A.†; Kang, D.†; Xue, Y.; Lee, S.; Pielak, R. M.; Kim. J.; Hwang, T.; Min, S.; Banks, A.; Bastien, P.; Manco, M. C.; Wang, L.; Ammann, K. R.; Jang, K.-I.; Won, P.; Han, S.; Slepian, M. J.; Balooch, G.; Huang, Y.; Rogers, J. A. “A Soft, Wearable Microfluidic Device for the Capture, Storage, and Colorimetric Sensing of Sweat”, Science Translational Medicine, 2016, 8(366), 366ra165 (cover article) † Equally contributed the first author
Koh, A.†; Gutbrod, S. R.†; Meyers, J. D.†; Lu, C.; Webb, R. C.; Shin, G.; Li, Y.; Kang, S.-K.; Huang, Y.; Efimov, I. R.; Rogers, J. A. “Ultrathin Injectable Sensors of Temperature and Thermal Conductivity for Cardiac Ablation Monitoring” Advanced Healthcare Materials, 2016, 5(3), 373-381 (back cover article) † Equally contributed the first author
Song, J.; Hong, Z.; Koh, A.; Shin, W. “Covalent immobilization of diaphorase in viologen polymer network for highly sensitive detection of NAD+ and NADH” Journal of Electrochemical Science and Technology, 2014, 5(1), 19-22
Koh, A.; Lu, Y.; Schoenfisch, M. H. “Fabrication of nitric oxide-releasing porous polyurethane membranes-coated needle-type implantable glucose biosensors” Analytical Chemistry, 2013, 85(21), 10488-10494
Koh, A.; Carpenter, A. W.; Slomberg, D. L.; Schoenfisch, M. H. “Nitric oxide-releasing silica nanoparticle-doped polyurethane electrospun nanofibers” ACS Applied Materials and Interfaces, 2013, 5(16), 7956-7964
Nichols, S. P.; Koh, A.; Storm, W. L.; Shin, J. H.; Schoenfisch, M. H. “Biocompatible materials for continuous glucose monitoring devices” Chemical Reviews, 2013, 113 (4), 2528-2549
Nichols, S. P.; Koh, A.; Brown, N. L.; Rose, M. B.; Sun, B.; Slomberg, D. L.; Riccio, D. A.; Klitzman, B.; Schoenfisch, M. H. “The effect of nitric oxide surface flux on the foreign body response to subcutaneous implants” Biomaterials, 2012, 33 (27), 6305-6312
Nichols, S. P.; Storm, W. L.; Koh, A.; Schoenfisch, M. H. “Local delivery of nitric oxide: targeted delivery of therapeutics to bone and connective tissues” Advanced Drug Delivery Reviews, 2012, 64 (12), 1177-1188
Koh, A.; Nichols, S. P.; Schoenfisch, M. H. “Glucose sensor membranes for mitigating the foreign body response” Journal of Diabetes Science and Technology 2011, 5 (5), 1052-1059
Koh, A.; Riccio, D. A.; Sun, B.; Carpenter, A. W.; Nichols, S. P.; Schoenfisch, M. H., “Fabrication of nitric oxide-releasing polyurethane glucose sensor membranes” Biosensors and Bioelectronics 2011, 28 (1), 17-24